BESCHREIBUNG
Teltonika OTD144 Outdoor-Router 4G LTE PoE DualSim - Outdoor-Router zur mobilen VideoüberwachungDer OTD144 sorgt selbst unter rauen Bedingungen für zuverlässiges Wi-Fi im Außenbereich. Er kombiniert LTE Cat 4 mit Dual-SIM-Failover, integriertem Wi-Fi sowie zwei Ethernet-Ports (PoE-in und PoE-out). Sein robustes IP55-Gehäuse mit integrierter Halterung ermöglicht eine schnelle und sichere Installation. Mit RutOS und RMS bietet der Router umfassende Funktionen wie VPN, Firewall, Hotspot und Remote Management für volle Kontrolle von überall.
Produktbesonderheiten: -
Outdoor Wi-Fi: Outdoor LTE Cat 4 Router mit integriertem Wi-Fi
-
Robustes Design: Wetterfestes Gehäuse mit IP55-Schutzklasse
-
Einfache Installation: Ein Kabel für Stromversorgung und Daten über PoE
-
Professionelles Management: Integriertes VPN, Hotspot und Remote Management
EIGENSCHAFTEN
Produktart
-
Typ: Router Zubehörartikel
-
Einsatzbereich: Außenbereich
-
Farbe: Weiß
-
Anwendung: Videoüberwachung IT
Ausstattung
-
Anschlüsse: RJ-45 (LAN) RJ-45 PoE (LAN) 2x RJ-45 2x SIM-Karte
Stromversorgung
-
Spannungsversorgung: 42,5 - 57 V DC
TECHNISCHE DATEN
- Mobile
-
Mobile module: 4G LTE Cat 4 up to 150 DL/50 UL
- Mbps. 3G up to 21
- DL/ 5.76 UL Mbps. 2G up to 236.8 DL/236.8 UL Mbps
-
3GPP Release: Release 9
-
SIM switch: 2 SIM cards, auto-switch cases: weak
- signal, data
- limit, SMS limit, roaming, no network, network denied, data connection
- fail, SIM idle protection
-
Status: IMSI, ICCID, operator, operator state,
- data connection
- state, network type, bandwidth, connected band, signal strength (RSSI),
- SINR, RSRP, RSRQ, EC/IO, RSCP, data sent/received, LAC, TAC, cell ID,
- ARFCN, UARFCN, EARFCN, MCC, and MNC
-
SMS: SMS status, SMS configuration, EMAIL to
- SMS, SMS to EMAIL,
- SMS to HTTP, SMS to SMS, scheduled SMS, SMS autoreply, SMPP
-
USSD: Supports sending and reading Unstructured
- Supplementary
- Service Data messages
-
Block/Allow list: Operator block/allow list (by
- country or
- separate operators)
-
Band management: Band lock, Used band status
- display
-
SIM PIN code management: SIM PIN code management
- enables setting,
- changing, or disabling the SIM card's PIN
-
APN: Auto APN
-
Bridge: Direct connection (bridge) between
- mobile ISP and device
- on LAN
-
Passthrough: Router assigns its mobile WAN IP
- address to another
- device on LAN
- Wireless
-
Wireless mode: 802.11b/g/n (Wi-Fi 4), Access
- Point (AP), Station
- (STA)
-
Wi-Fi security: WPA2-Enterprise: PEAP, WPA2-PSK,
- WPA-EAP,
- WPA-PSK, WPA3-SAE, WPA3-EAP, OWE. AES-CCMP, TKIP, Auto-cipher modes,
- client separation, EAP-TLS with PKCS#12 certificates, disable
- auto-reconnect, 802.11w Protected Management Frames (PMF)
-
SSID/ESSID: SSID stealth mode and access control
- based on MAC
- address
-
Wi-Fi users: Up to 100 simultaneous connections
-
Wireless Connectivity Features: Wireless mesh
- (802.11s), fast
- roaming (802.11r), Radio Resource Measurement (802.11k), BSS Transition
- Management (802.11v), Client isolation, Hide SSID, WMM
-
Wireless MAC filter: Allowlist, blocklist
-
Wireless QR code generator: Once scanned, a user
- will
- automatically enter your network without needing to input login
- information
-
TravelMate: Forward Wi-Fi hotspot landing page
- to a subsequent
- connected device
- Ethernet
-
LAN: 2 x ETH ports (can be configured as WAN),
- 10/100 Mbps,
- compliance with IEEE 802.3, IEEE 802.3u, 802.3az standards, supports
- auto MDI/MDIX crossover
- POE IN
-
PoE ports: 1 x PoE In
-
PoE standards: 802.3af/at
- POE OUT
-
PoE ports: 1 x PoE Out
-
PoE standards: 802.3af Alternative B
-
PoE Max Power per Port (at PSE): 15 W Max (power
- supply unit
- dependent)
- Network
-
Routing: Static routing, Dynamic routing (BGP,
- OSPF v2, RIP
- v1/v2, EIGRP, NHRP), Policy based routing
-
Network protocols: TCP, UDP, IPv4, IPv6, ICMP,
- NTP, DNS, HTTP,
- HTTPS, SFTP, FTP, SMTP, SSL/TLS, ARP, VRRP, PPP, PPPoE, UPNP, SSH,
- DHCP, Telnet, SMPP, SNMP, MQTT, Wake On Lan (WOL), VXLAN
-
VoIP passthrough support: H.323 and SIP-alg
- protocol NAT helpers,
- allowing proper routing of VoIP packets
-
Connection monitoring: Ping Reboot, Wget Reboot,
- Periodic Reboot,
- LCP and ICMP for link inspection
-
Firewall: Port forward, traffic rules, custom
- rules, TTL target
- customisation
-
Firewall status page: View all your Firewall
- statistics, rules,
- and rule counters
-
Port management: View device ports, enable and
- disable each of
- them, turn auto-configuration on or off, change their transmission
- speed, and so on
-
Network topology: Visual representation of your
- network, showing
- which devices are connected to which other devices
-
DHCP: Static and dynamic IP allocation, DHCP
- relay, DHCP server
-
configuration, status, static leases: MAC with wildcards
-
QoS / Smart Queue Management (SQM): Traffic
- priority queuing by
- source/destination, service, protocol or port, WMM, 802.11e
-
DDNS: Supported >.77 service providers, others
- can be
- configured manually
-
DNS over HTTPS: DNS over HTTPS proxy enables
- secure DNS
- resolution by routing DNS queries over HTTPS
-
Network backup: VRRP, Wired options, each of
- which can be used as
- an automatic Failover
-
Hotspot: Captive portal (hotspot),
- internal/external Radius
- server, Radius MAC authentication, SMS authorisation, SSO
- authentication, internal/external landing page, walled garden, user
- scripts, URL parameters, user groups, individual user or group
- limitations, user management, 9 default customisable themes and
- optionality to upload and download customised hotspot themes
-
SSHFS: Possibility to mount remote file system
- via SSH protocol
-
Traffic Management: Real-time monitoring,
- wireless signal charts,
- traffic usage history?
- Security
-
Authentication: Pre-shared key, digital
- certificates, X.509
- certificates, TACACS+, Internal &. External RADIUS users
- authentication, IP &. login attempts block, time-based login
- blocking, built-in random password generator
-
Firewall: Preconfigured firewall rules can be
- enabled via WebUI,
- unlimited firewall configuration via CLI, DMZ, NAT, NAT-T, NAT64
-
Attack prevention: DDOS prevention (SYN flood
- protection, SSH
- attack prevention, HTTP/HTTPS attack prevention), port scan prevention
- (SYN-FIN, SYN-RST, X-mas, NULL flags, FIN scan attacks)
-
VLAN: Port and tag-based VLAN separation
-
Mobile quota control: Mobile data limit,
- customizable period,
- start time, warning limit, phone number
-
WEB filter: Block list for blocking out unwanted
- websites, allow
- list for specifying allowed sites only
-
Access control: Flexible access control of SSH,
- Web interface,
- CLI and Telnet
-
Certificate Manager: Certificate creation tool
- allows to create
- CA, server, client, let's encrypt, SCEP certificates
-
802.1x: Port-based network access control server
- VPN
-
OpenVPN: Multiple clients and a server can run
- simultaneously, 27
- encryption methods
-
OpenVPN Encryption: DES-CBC 64, RC2-CBC 128,
- DES-EDE-CBC 128,
- DES-EDE3-CBC 192, DESX-CBC 192, BF-CBC 128, RC2-40-CBC 40, CAST5-CBC
- 128, RC2-64-CBC 64, AES-128-CBC 128, AES-128-CFB 128, AES-128-CFB1 128,
- AES-128-CFB8 128, AES-128-OFB 128, AES-128-GCM 128, AES-192-CFB 192,
- AES-192-CFB1 192, AES-192-CFB8 192, AES-192-OFB 192, AES-192-CBC 192,
- AES-192-GCM 192, AES-256-GCM 256, AES-256-CFB 256, AES-256-CFB1 256,
- AES-256-CFB8 256, AES-256-OFB 256, AES-256-CBC 256
-
IPsec: XFRM, IKEv1, IKEv2, with 14 encryption
- methods for IPsec
- (3DES, DES, AES128, AES192, AES256, AES128GCM8, AES192GCM8, AES256GCM8,
- AES128GCM12, AES192GCM12, AES256GCM12, AES128GCM16, AES192GCM16,
- AES256GCM16)
-
GRE: GRE tunnel, GRE tunnel over IPsec support
-
PPTP, L2TP: Client/Server instances can run
- simultaneously,
- L2TPv3, L2TP over IPsec support
-
Stunnel: Proxy designed to add TLS encryption
- functionality to
- existing clients and servers without any changes in the program’s code
-
DMVPN: Method of building scalable IPsec VPNs,
- Phase 2 and Phase
- 3 and Dual Hub support
-
SSTP: SSTP client instance support
-
ZeroTier: ZeroTier VPN client support
-
WireGuard: WireGuard VPN client and server
- support
-
Tinc: Tinc offers encryption, authentication and
- compression in
- it's tunnels. Client and server support.
- OPC UA
-
Supported modes: Client, Server
-
Supported connection types: TCP
- MODBUS
-
Supported modes: Server, Client
-
Supported connection types: TCP
-
Custom registers: MODBUS TCP custom register
- block requests,
- which read/write to a file inside the router, and can be used to extend
- MODBUS TCP Client functionality
-
Supported data formats: 8-bit: INT, UINT.
-
16-bit: INT, UINT (MSB
-
or LSB first). 32-bit: float, INT, UINT (ABCD (big-endian), DCBA
- (little-endian), CDAB, BADC), HEX, ASCII
- DATA TO SERVER
-
Protocol: HTTP(S), MQTT, Azure MQTT
-
Data to server: Extract parameters from multiple
- sources and
- different protocols, and send them all to a single server. Custom LUA
- scripting, allowing scripts to utilize the router's Data to server
- feature
- MQTT Gateway
-
Modbus MQTT Gateway: Allows sending commands and
- receiving data
- from MODBUS Server through MQTT broker
- DNP3
-
Supported modes: Station, Outstation
-
Supported connection: TCP
- DLMS/COSEM
-
DLMS Support: DLMS - standard protocol for
- utility meter data
- exchange
-
Supported modes: Client
-
Supported connection types: TCP
- API
- Teltonika Networks Web API (beta) support
- Expand your device's
- possibilities by using a set of configurable API endpoints to retrieve
- or change data.
- Monitoring &. Management
-
WEB UI: HTTP/HTTPS, status, configuration, FW
- update, CLI,
- troubleshoot, multiple event log servers, firmware update availability
- notifications, event log, system log, kernel log, Internet status
-
FOTA: Firmware update from server, automatic
- notification
-
SSH: SSH (v1, v2)
-
Email: Receive email message status alerts of
- various services
-
SMS: SMS status, SMS configuration
-
Call: Reboot, Status, Mobile data on/off, Output
- on/off,
- answer/hang-up with a timer
-
TR-069: OpenACS, EasyCwmp, ACSLite, tGem,
- LibreACS, GenieACS,
- FreeACS, LibCWMP, Friendly tech, AVSystem
-
MQTT: MQTT Broker, MQTT publisher
-
SNMP: SNMP (v1, v2, v3), SNMP Trap, Brute force
- protection
-
JSON-RPC: Management API over HTTP/HTTPS
-
RMS: Teltonika Remote Management System (RMS)
- IoT Platforms
-
ThingWorx: Allows monitoring of: WAN Type, WAN
- IP, Mobile
- Operator Name, Mobile Signal Strength, Mobile Network Type
-
Cumulocity - Cloud of Things: Allows monitoring
-
of: Device Model,
- Revision and Serial Number, WAN Type and IP, Mobile Cell ID, ICCID,
- IMEI, Connection Type, Operator, Signal Strength. Has reboot and
- firmware upgrade actions
-
Azure IoT Hub: Can be configured with Data to
- Server to send all
- the available parameters to the cloud. Has Direct method support which
- allows to execute RutOS API calls on the IoT Hub. Also has Plug and
- Play integration with Device Provisioning Service that allows
- zero-touch device provisioning to IoT Hubs
-
AWS IoT Core: Utility to interact with the AWS
- cloud platform.
-
Jobs Support: Call the device's API using AWS Jobs functionality
- System Characteristics
-
CPU: Mediatek, 580 MHz, MIPS 24KEc
-
RAM: 128 MB
-
FLASH storage: 16 MB
- Firmware / Configuration
-
WEB UI: Update FW from file, check FW on server,
- configuration
- profiles, configuration backup
-
FOTA: Update FW
-
RMS: Update FW/configuration for multiple
- devices at once
-
Keep settings: Update FW without losing current
- configuration
-
Factory settings reset: A full factory reset
- restores all system
- settings, including the IP address, PIN, and user data to the default
- manufacturer's configuration
- FIRMWARE CUSTOMISATION
-
Operating system: RutOS (OpenWrt based Linux OS)
-
Supported languages: Busybox shell, Lua, C, C++,
- and Python, Java
- in Package manager
-
Development tools: SDK package with build
- environment provided
-
GPL customization: You can create your own
- custom, branded
- firmware and web page application by changing colours, logos, and other
- elements in our firmware to fit your or your clients’ needs
-
Package Manager: The Package Manager is a
- service used to install
- additional software on the device
- Power
-
Connector: RJ45 Socket
-
Input voltage range: 42.5–57.0 VDC, reverse
- polarity protection,
- voltage surge/transient protection
-
Input voltage range for PoE: 42.5–57.0 VDC,
- reverse polarity
- protection, voltage surge/transient protection
-
Power consumption: Idle: <. 2.5 W / Max: <.
- 6 W / PoE Max
- <. 21 W
- Physical Interfaces
-
Ethernet: 2 x RJ45 ports, 10/100 Mbps
-
Status LEDs: 3 x Mobile connection type, 3 x
- Mobile connection
- strength, 4 x ETH status LEDs
-
SIM: 2 x SIM slots (Mini SIM – 2FF), 1.8 V/3 V
-
Power: RJ45, PoE In, 42.5 – 57.0 VDC
-
Antennas: 2 x Internal antennas
-
Antennas specifications: 2 x 698 - 960 / 1710 -
- 2690MHz, 50 O,
- VSWR <.3, gain <.4.5 dBi, omnidirectional
-
Reset: Reboot/User default reset/Factory reset
- button
- Physical Specification
-
Casing material: Plastic (PC+ASA)
-
Dimensions (W x H x D): 110 x 49.30 x 235 mm
-
Weight: 315 g
-
Mounting options: Mounting bracket (for vertical
- flat surface or
- pole mounting)
- Operating Environment
-
Operating temperature: -40 °C to 75 °C
-
Operating humidity: 10% to 90% non-condensing
-
Ingress Protection Rating: IP55
LIEFERUMFANG
1x Teltonika OTD144 Outdoor-Router 4G LTE PoE DualSim
Angaben gemäß EU-Verordnung (EU) 2023/988 (GPSR):Teltonika Networks
K. Baršausko st. 66, 51436 Kaunas, Litauen
Webadresse: www.teltonika-networks.com
Angaben zur Produktsicherheit
Herstellerinformationen:
Teltonika
, ,
