VIVOTEK HLG-120H-54 Netzteil, 54VDC, 120W

Artikelnummer: EX-10036523

Kategorie: Netzteile

151,37 €

inkl. 19% USt. , zzgl.

VIVOTEK HLG-120H-54 Netzteil, 54VDC, 120W Netzteil, Anwendung: Videoüberwachung

Stk

VIVOTEK HLG-120H-54 Netzteil, 54VDC, 120W Netzteil, Anwendung: Videoüberwachung

OUTPUT

DC VOLTAGE: 54V
CONSTANT CURRENT REGION: 27 ~ 54V
RATED CURRENT: 2.3A
RATED POWER: 124.2W
RIPPLE & NOISE (max.): 200mVp-p
VOLTAGE ADJ. RANGE: 49 ~ 58V
CURRENT ADJ. RANGE: Can be adjusted by internal potentiometer A type only: 1.1 ~ 2.3A
VOLTAGE TOLERANCE: ±1.0%
LINE REGULATION: ±0.5%
LOAD REGULATION: ±0.5%
SETUP, RISE TIME: 1200ms,50ms/115VAC 500ms,50ms/230VAC at full load B type 1200ms,200ms/115VAC 500ms,200ms/230VAC at 95% load
HOLD UP TIME (Typ.): 12ms at full load 230VAC / 115VAC

INPUT

VOLTAGE RANGE: 90 ~ 305VAC / 127 ~ 431VDC
FREQUENCY RANGE: 47 ~ 63Hz
POWER FACTOR (Typ.): PF>0.98/115VAC, PF>0.95/230VAC, PF>0.93/277VAC at full load (Please refer to "Power Factor Characteristic" curve)
TOTAL HARMONIC DISTORTION: THD< 20% when output loading?50% at 115VAC/230VAC input and output loading?75% at 277VAC input
EFFICIENCY (Typ.): 93.5%
AC CURRENT (Typ.): 0.55A / 277VAC
INRUSH CURRENT (Typ.): COLD START 60A(twidth=375µs measured at 50% Ipeak) at 230VAC
MAX. No. of PSUs on 16A CIRCUIT BREAKER: 5 units (circuit breaker of type B) / 9 units (circuit breaker of type C) at 230VAC
LEAKAGE CURRENT: <0.75mA / 277VAC

PROTECTION

95 ~ 108%
Protection type: Constant current limiting, recovers automatically after fault condition is removed

SHORT CIRCUIT: Constant current limiting, recovers automatically after fault condition is removed
OVER VOLTAGE:

59 ~ 65V
Protection type: Shut down o/p voltage with auto-recovery or re-power on to recovery

OVER TEMPERATURE: Shut down o/p voltage, recovers automatically after temperature goes down

ENVIRONMENT

WORKING TEMP.: -40 ~ +70? (Refer to "Derating Curve")
WORKING HUMIDITY: 20 ~ 95% RH non-condensing
STORAGE TEMP., HUMIDITY: -40 ~ +80?, 10 ~ 95% RH
TEMP. COEFFICIENT: ±0.03%/? (0 ~ 50?)
VIBRATION: 10 ~ 500Hz, 5G 12min./1cycle, period for 72min. each along X, Y, Z axes

SAFETY & EMC

SAFETY STANDARDS: UL8750, CSA C22.2 No. 250.0-08, ENEC, TUV EN61347-1, EN61347-2-13 independent IP65 or IP67, J61347-1, J61347-2-13 approved design refer to UL60950-1, TUV EN60950-1
WITHSTAND VOLTAGE: I/P-O/P:3.75KVAC I/P-FG:2KVAC O/P-FG:1.5KVAC
ISOLATION RESISTANCE: I/P-O/P, I/P-FG, O/P-FG:100M Ohms / 500VDC / 25?/ 70% RH
EMC EMISSION: Compliance to EN55015, EN55022 (CISPR22) Class B, EN61000-3-2 Class C (?50% load) EN61000-3-3
EMC IMMUNITY: Compliance to EN61000-4-2,3,4,5,6,8,11, EN61547, EN55024, light industry level (surge 4KV), criteria A