General -
- 1 RJ45 Ethernet Data Input Port + 1 RJ45 Power over Ethernet Output Port (Data + Power)
- Support 90W (IEEE802.3bt) Power Sourcing Equipment
- Support 10/100/1000Base-TX
- Extensive LED indicators for PoE diagnostics
- 48~57VDC Terminal Block Power inputs
- Supports DIN-Rail and Wall-mount installation
- -40°C to 75°C (-40°F to 167°F) operating temperature
 
Ordering Information -
| Available Model | Description |
| ET-INJ90 | Hardened Gigabit Single-Port 90W (IEEE802.3bt) PoE Injector |
| Optional Accessories (to be purchased separately) |
| Power Supply | Please refer to the power supply information at the back of the catalogue, our website www.ot-systems.com, or consult OTS sales at sales@ot-systems.com for your power system design properly. |
| Package Checklist |
| - Hardened Gigabit PoE Injector | x 1 |
| - Wall Mount Plates | x 1 |
| - Din Rail Clip | x 1 |
| - Quick Installation Guide | x 1 |
 
| Ethernet |
| Standards | IEEE802.3bt Power over Ethernet |
| Processing Type | Forward |
| Half-duplex, Full duplex |
| Forward Filter Rate | 1,488,000pps (1000Mbps) |
| Cabling | 1000Base-TX: Cat5 or above |
| Maximum Distance | Cat5 UTP up to 100m |
| Connector | 2 x RJ45 |
| Electrical and Mechanical |
| Input Power | 48~57VDC (Terminal Block) |
| Power Consumption | 95W Max. |
| LED Indicators |
| Power | Power Status |
| PoE | PoE Status |
| PoE | IEEE802.3bt, up to 90W |
| 4 pair output power for PoE++ (90W) |
2 pair output powe="">
|
Product safety information
