WJ-PC200E PANASONIC
Kurzbeschreibung:
Beschreibung:
Kamera-End-Einheit |
Beschreibung:
Key Features |
  |
Einfache Umwandlung von Analog zu IP System mit Koaxialkabel |
  |
Two models (4-channel and 1-channel) are provided on the receiver side |
- Up to 4 network cameras can be connected and |
used on a single receiver side unit.(WJ-PR204) |
  |
Power over Ethernet Plus (PoE+) ready |
- The coaxial - LAN converter is compliant with PoE+ standards (IEEE802.3at) and PoE+ cameras can be connected and used*1. |
  |
Use over long distances (WJ-PR201) |
- The coaxial - LAN converter can be used for distances of up to 300 m for PoE+ connections and 500 m for PoE connections, and 2.0 km for non-PoE+ connections. (When used with RG-6/U coaxial cable, and the loop resistance is below 4 W/100 m without additional joint parts.) |
  |
- High-speed transmission |
The coaxial - LAN converter is capable of transmission speeds of 35 Mbps or over for TCP*2, and 45 Mbps or over for UDP connections*2. (When used with RG-6/U coaxial cable, and for distances under 2.0 km |
  |
No setup required |
- Connections can be established by simply connecting the coaxial cable to the coaxial - LAN converter. |
  |
*1 There are limitations on the combinations of the cameras to be connected, the type of power supply and |
transmission range to the receiver side units. For more detail please see the operating instructions on our website |
( http://security.panasonic.com/pss/security/support/ ). |
*2 Transmission speed is the speed of transmission between the receiver side unit and the camera side unit. |
Values may vary depending on the condition of the coaxial cable (for example, as the cable deteriorates overtime), network conditions, etc. |